Bergeon 6825-XF replacement fork for bracelet pliers 6825 1.00 mm, suitable for Rolex bracelets.
The price is for 1 pieces, not for 1 set.
Use only for Bergeon 6825..
Bergeon 7026-AC6 set of 6 each is made of anti-magnetic steel with very good resistance to corrosion and acids and are temperature resistant up to 350 °C.
Included:
The following..
Probably the most efficient tool for inserting, removing and reinserting watch band pins of all watch types; especially from high end watches like Omega, Tudor, Breitling Movado, T..
The loop pliers trims and bends wire pins in a single motion. It works with wire from 9,5 cm longer and creates a loop with 1,5 mm inner diameter.
Use dead-soft or half-hard preci..
Goldsmiths hammer made of steel, precision ground - carefully hardened and tempered in accordance with regulations - cleanly varnished and rust-protected by powder varnishing - tra..
Set of 5 of pliers for jewelers and watchmakers, 130 mm:
Flat nose pliers without cut
Chain nose pliers without cut
Round nose pliers
Side cutter
End cutter
Made in Germa..
Nylon hammer with replaceable nylon heads and ash handle, prevents damage to the material.
Head Ø: 27 mmHead weight: 205 gHead length: 90 mmTotal weight: 250 g
Made in Germany..
Dumont Dumoxel #3 HiTech series tweezer for working areas where magnetic fields are present, e.g., coils, rotors etc. Relatively good hardness, and with 90% insensitive to magnetis..
Specially manufactured tweezers from antimagnetic steel with exchangeable wooden tips for scratch-sensitive components.New patented design with the following advantages:- better gr..
Lindstrom 7893 is high-quality chain nose pliers of the Supreme series made of high-alloy ball bearing steel for extremely long service life. Finest processing, surface and cutting..
Lindstrom 7890 is high-quality chain nose pliers of the Supreme series made of high-alloy ball bearing steel for extremely long service life. Finest processing, surface and cutting..
Boley small, practical hammer, one side in nylon, the other side in brass. Suitable for watchmaker's and goldsmith's.
Head length: 65 mmTotal weight: 140 g
..
VOH 24.00177 tweezers for fixing watch bracelets 1.40 mm. Suitable for Breitling, Tissot, Omega, Zenith, Longines and etc.
Doesn't fit for Rolex watches, you can use Bergeon 78..
Special cutting pliers for straps to fix catches spring bars. This plier has been developed especially to fit spring bars with lever on a normal bracelet...
Dumont tweezer Type 9/2, for Breguet hairspring spiral, wide execution, stainless steel-carbon, 110 mm
Color: Silver color
Length: 110 mm
Material: Carbon Steel..
Dumont tweezers type 15A even the finest tweezers made of carbon steel have very sturdy spring stiffness. Carbon tweezers cannot be anti-magnetic/acid-resistant due to the steel sp..
Lindstrom TRX 8180 is high-quality and strong diagonal cutter with oval head and high-alloy ball bearing steel for extremely long service life. Finest processing, cutting and head ..
All Supreme series cutters and pliers feature a special screw and nut connection that minimizes friction and maximizes jaw alignment. As well as double leaf springs for quick openi..
Lindstrom 7490 is high-quality flat nose pliers of the Supreme series made of high-alloy ball bearing steel for extremely long service life. Finest processing, surface and cutting ..
Lindström 8154 high-quality diagonal cutter with tapared head and high-alloy ball bearing steel for extremely long service life. Finest processing, cutting and head are computer-gr..
Lindström 8160 is high-quality diagonal cutter with oval head and high-alloy ball bearing steel for extremely long service life. Finest processing, cutting and head are computer-gr..
Lindstrom 8141 is high-quality diagonal cutter with oval head and high-alloy ball bearing steel for extremely long service life. Finest processing, cutting and head are computer-gr..
Lindström 8142 is high-quality diagonal cutter with oval head and high-alloy ball bearing steel for extremely long service life. Finest processing, cutting and head are computer-gr..
The loop pliers trims and bends wire pins in a single motion. It works with wire from 9,5 cm longer and creates a loop with 2,25 mm inner diameter.
Use dead-soft or half-hard prec..
The loop pliers trims and bends wire pins in a single motion. It works with wire from 9,5 cm longer and creates a loop with 3 mm inner diameter.
Use dead-soft or half-hard preciou..
Boley Form F is precision tweezers with the best processing quality. Specially manufactured tweezers made of anti-magnetic steel with replaceable wooden tips form F. Ideal for hand..
Dumont #3 carbon steel is the hardest material used for the manufacture of tweezers. Even the finest of tweezers in carbon steel have a very stable spring hardness. These tzweezers..
Lindstrom 7190 is high-quality diagonal cutter of the Supreme series with pointed head and high-alloy ball bearing steel for extremely long service life. Finest processing, cutting..
Lindstrom 7590 is high-quality round nose tiped pliers of the Supreme series made of high-alloy ball bearing steel for extremely long service life. Finest processing, surfaces are..
Lindstrom 8140 is high-quality diagonal cutter with oval head and high-alloy ball bearing steel for extremely long service life. Finest processing, cutting and head are computer-gr..
Bergeon 31227 is a special cutting pliers for straps to fix catches spring bars. This plier has been developed especially to fit spring bars with lever on a normal bracelet.
With ..
Bergeon 7140 is a special tweezers for securely holding glasses and dials. Anti-magnetic made of stainless steel with specially manufactured carbon fibre tips. Tips interchangeable..